Evolution 7A2

2 x 125 Watt @4 ohm | 2 x 160 Watt @2 ohm | 1 x 350 Watt @4 ohm bridged

Description

Crescendo Evolution 7A2 is 2 channel amplifier to drive 1 pair of speakers with 125 Watts of power and 1 piece of 4 ohm subwoofer with 350 Watts of power. This amplifier produces dynamic and natural sound. On top of that, the design is elegant with enlightened Crescendo logo.

Crescendo Evolution 7A2 utilizes high bias class AB design which is well known for its low distortion sound and yet save for small alternator car.

Some modern features of Evolution 7A2 as follows:

Amplifier applies big filter capacitor to balance low and high pitch.

Amplifier is supported with high quality components such as Toshiba transistor, International Rectifier mosfet, and Wima capacitor.

Preamplifier utilizes terminated design like legendary home audio preamplifier.


Crescendo Evolution 7A2 adalah amplifier 2 kanal yang mampu menggerakkan 1 pasang pengeras suara dengan tenaga 125 Watt atau sebuah subwoofer 4 ohm dengan tenaga 350 Watt. Amplifier ini menghasilkan suara yang dinamis dan natural. Terlebih lagi desainnya terlihat elegan dengan logo Crescendo yang menyala temaram.

Crescendo Evolution 7A2 menggunakan topologi desain kelas AB bias tinggi yang terkenal minim distorsi tetapi masih dalam batas aman untuk mobil dengan alternator kecil sekalipun.

Beberapa fitur unggulan yang dimiliki Evolution 7A2 adalah:

Amplifier menggunakan kapasitor filter berukuran besar untuk menjaga keseimbangan antara nada rendah dan nada tinggi.

Amplifier didukung oleh komponen berkualitas tingi seperti transistor Toshiba, mosfet International Rectifier, dan capacitor Wima.

Preamplifier menggunakan desain terminated seperti pada preamplifier rumah yang legendaris.

Additional information

Weight 2.9 kg
Dimensions 238 × 201 × 61 mm
Amplifier Design

Class AB high bias

Cosmetic appearance

Dark blue with silver lining

Number of channel(s)

2

Power at 4 Ω stereo

2 x 125 Watt

Power at 2 Ω stereo

2 x 160 Watt

Power at 4 Ω bridged

1 x 350 Watt

Minimum speaker load

2 Ω at stereo, 4 Ω at mono

Input sensitivity

0.2 – 5 V

Frequency response

10 Hz – 25 kHz

Fuse

40 Ampere

Low pass filter

50 Hz – 750 Hz

High pass filter

50 Hz – 750 Hz

Total harmonic distortion at 4 Ω

< 0.02%

Signal to noise ratio

> 90 dB

Remote control

Not available

Low voltage protection

Yes, protect < 8 Volt

Overheat protection

Yes, at 80 Celcius / 176 Fahrenheit

Install